BT95 105G铜版纸 80x100MM 单色五折页印刷
TALK FOCUS Wireless HANDSFREE CAR KIT
- Ensure high quality talking while freeway driving
+With QC3.0 fast charging
+With PD3.0 fast charging
User Guide
Model：BT95
LINE OUT
1.Unidireconal microphone
2.QC3.0 fast charging port (DC3.5-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A)
3.Type-C charging port: Support PD3.0 (20W) charging protocol
4.Combinaon funcon
1.Noise canceling buon
2. Long press for 2S to shut down (retain charging funcon aer shung down)
5.Music mode: previous song
Mode switching: long press 2S (loop, single, random) to play
6.Music mode: next song
Light switch: long press 2S (circular light, seven-color light switch)
7. Combinaon funcon
1. Bass booster buon
2. Long press 2S to turn off the ambient light
8.Phone buons: play/pause/answer/hang up/double-tap to start Siri
9.Aluminum knob
*Music mode: short press to play/pause; turn le to volume V-, turn right to volume V+
*Incoming call mode: short press to answer; long press: reject
* During a call: short press to hang up; long press: transfer to a private call
*Long press 2S: enter FM mode: rotate CH- to the le and CH+ to the right
*Double click: wake up Siri/Google voice assistant, click to exit
10.3.5MM audio hole
11.Mini SD card slot
Packaging accessories
• FM transmier*1
• Instrucon manual*1
• Air outlet bracket*1
• 3.5MM audio cable*1
• 4A fuse*1
Features:
• Adjust the local channel to the car radio channel to be consistent, which can realize SD card music
transmission to car speakers and solve the baery life charging of mobile phones and other smart
devices. Bluetooth hands-free call funcon can be realized through car audio by connecng Bluetooth
with mobile phones. Turning on the noise canceling buon during high-speed operaon can eliminate
road noise, wind noise, environmental noise, etc., and realize your high-definion call experience.
Parameter
Wireless version: V5.0
Product name：BT95
Effecve distanc : 5m
Memory card format and capacity: Micro SD card, support 64G
FM frequency range : 87.5MHz-108.0MHz
Compable audio format: MP3.WMA.WAV.FLAC, APE
Compable with Bluetooth protocol: A2DP/AVRCP/HSP/HFP
Orange fast charging port: supports QC3.0 Protocol (DC 3.6-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A)
Type-C port support: PD3.0 (20W) charging protocol
Product installaon
1.Put the threaded knob on the end of the air outlet bracket.
2.Insert the set of air outlet bracket into the round hole at the back of the main unit.
3.Tighten the thread
4.Open the air outlet bracket and insert it into the car air-condioning air outlet grille, ghten the
screws to the best strength, adjust the angle of the machine, and then use it.
Detailed accessories
● Metal washers
● Fuse
● Rubber gasket
● Metal p screws
How to install the fuse?
1. Rotate the screw on the boom of the Bluetooth FM transmier counterclockwise
2. Insert the fuse into the screw hole with the metal p, the metal on the edge of the fuse will be
aached to the metal p
3. Assemble the rubber gasket
4. Assemble the metal gasket
5. Turn the screw clockwise to the boom of the Bluetooth FM transmier
11. Frequently Asked Quesons (Block Diagram)
11.1. Noise issues
Soluon:
A. Reduce the volume of the speaker by one third and increase the volume of the smart device
B. Signal interference. Please switch to another empty white frequency point
C. Plug and unplug the machine again to restore the inial state and work again
3. Music funcon (please make sure the connecon is successful before use)
3.1.1 Audio source: Bluetooth/TF card
3.1.2 Music sound effect: default stereo sound effect playback
3.1.3 File mode: Insert a Micro SD card containing MP3 / WMA / APE / FLAC / WAV / APE files into the
transmier, and the transmier will automacally start playing the files. When there is an incoming call,
this device will automacally switch to the call.
A. Bluetooth mode: Refer to the instrucons of the smart device.
Such as phone. Aer the Bluetooth connecon is successful, the music on the smart device can be
played and synchronized to the car's built-in speaker
B.TF card mode: plug in TF, "BT95" will automacally recognize and play the music inside
Note: To ensure a beer experience of the product, when using this product, please select only one
audio source.
3.2. Audio source selecon
A. Used between Bluetooth and TF card, it will recognize the last connected device to play by default.
B. Auto play opon via TF card: plug and play.
C. Aer power off or restart, BT95 will enter the previous play mode (automacally play music in TF
card mode, and manual play in Bluetooth mode is required
3.3. Audio playback operaon
A. Play/Pause: Click
B. Previous/Next: Short press " " to play the previous song, short press " " to the next song
3.4. Switching the music playing mode
A.In the music play mode, long press the " " buon for 2S to switch (list loop play, single loop play,
random play) and other play modes
4. High-speed noise canceling buon
4.1. During a call, click the buon to enter the high-speed noise cancellaon mode, and there will be
a Dingdong voice prompt. When talking with the other party, the noise in the car environment will be
suppressed, so that the person who answers the call can enjoy a clear and interference-free call
experience.
4.2. Click the buon again to exit the high-speed noise cancellaon mode
5.QC3.0 charging port descripon
5.1. The output power is 18W, compable with FCP/QC3.0/QC2.0/BC1.2/DCP, etc.
5.2. Smart devices that support QC3.0 fast charge, meet QC3.0 fast charge protocol: DC 3.6-6.5V/3A,
6.5-9V/2A, 9-12V/1.5A.
11.2. The other party cannot hear you during a call
Reason 1: The dialing method is wrong
solve:
A. When a call comes in, click the phone buon "" to answer the call through the speaker in the car
B. Acvate the phone speaker to answer the call
Reason 2: The call volume is low
solve:
A. Increase the volume of the phone.
B. The volume of the other party is too low during the call, just ask the other party to increase the
volume.
Reason 3: The microphone is broken
Suggeson: Contact customer service for help
Friendly reminder:
Aer receiving the product, do not rush to insert the product into the cigaree lighter jack of the car.
Aer starng the car, first turn on the idle FM radio, and paently select a blank channel with no local
programs on the car radio. The standard is a slight rustle. Then insert the product into the cigaree
lighter jack and adjust the FM frequency of the product to be the same as the FM frequency of the car.
At this me, the car radio will be very quiet and there will be no stac electricity interference. (If it is
sll not quiet, please try to find a new blank channel again), and finally connect to your phone via
wireless. When they are successfully paired, you can listen to songs on your phone and make
hands-free calls on your phone.
6.Type-C charging port descripon
6.1. Output power 20W, support PD3.0 fast charging protocol
6.2. Smart devices that support PD3.0 protocol, meet DC 5V/3A, 9V/2.22A, 12V/1.67A output
7. Acvate the voice assistant funcon
7.1 Support Siri and Google Assistant voice assistant wake-up
7.2 Press and hold the buon for 2 seconds to wake up under Bluetooth connecon
8.How to ensure high-quality calls when driving on the highway
8.1 Adjust the direcon of the microphone unl he is directly facing the driver
8.2 Press the buon during the call, (when you hear the Dingdong tone, turn on the road noise
reducon mode)
9. Ambient light color switching
9.1 Long press the " " buon in any mode to switch the ambient light (red/green/blue/yellow/pur-
ple/sky blue/white/orange/mul-color light rotaon)
10. Schemac diagram of fuse replacement
*Highly developed security
*Innovave fuse tube design and replaceable
*It can protect your car and car charger in case of overcurrent.
* Comes with a spare fuse
Power on/off
Turn on: Insert the BT95 into the cigaree lighter hole of the car. Aer the car is started, the blue
display will automacally turn on and flash once per second. If it is off, long press the " " buon for 3
seconds to turn on BT95
Shutdown: Cut off the power to shut down or long press " " for 3 seconds to shut down when there
is power
Note: Even if the BT95 is turned off, the charging port can sll work normally
Screen display
1. Aer power on, the blue display shows bt and frequency flashing alternately
2. Aer the pairing is successful, the screen displays bt will be on
3. Long press the " " buon to enter the frequency modulaon mode (display digital frequency)
User's guidance
1. FM and Bluetooth pairing
Note: In order to let you enjoy higher-quality music, you need to adjust the blank frequency of BH469
to be the same as that of the car (non-local broadcast channel) when using it for the first me. Every
me you use it, please make sure that the frequency between the transmier and your car is the same
(not the local broadcast channel).
1.1. Turn the car radio to a blank frequency point (that is, a channel without any broadcasng). The
reference is: clear rustling,
1.2. Long press the " " buon, the number flashes to enter the FM mode, turn the knob le and
right to increase or decrease the frequency, and adjust to the same frequency as the car radio, such as:
FM88.8. Click the " " buon again or wait 3 seconds to exit the FM mode mode
1.3. Bluetooth connecon:
A. Aer power on, the BT95 screen displays HI, and then displays the current car baery voltage. Aer
2 seconds, it enters the bt state, which means it enters the pairing state, waing for pairing
B. Turn on the bluetooth of the smart device, search for "BT95", then connect, aer connecng, the
screen displays bt long on, and you can play music via bluetooth. Usually the connecon will be
automacally paired but somemes it will ask you to enter a password. If prompted, enter the inial
password "0000".
(When used for the second me, BT95 will connect to the last device connected last me.)
(1).Find a blank frequency in your car radio (to ensure the sound quality of the device, please first
select a blank channel with no local broadcast programs)
106.2
QC3.0
PD20W
/CH
106.2
/CH
2. Bluetooth hands-free funcon
A. Answer the call: Click the " " buon.
B. Hang up the call: Click the " " buon.
C. Reject the call: long press the " " buon for 2 seconds
D. Switch private calls: Press and hold the " " buon for 2 seconds during the call.
(2. Long press " " to enter FM mode
In FM mode: Le-hand knob buon CH-
Turn the knob to the right key CH+
In music mode: Le-hand knob buon volume V-
Turn the knob to the right buon volume V+
(3). Enter Bluetooth pairing mode
Turn on the phone’s Bluetooth, search for the Bluetooth name: BT95, click connect,
open the music player, and click play to play Bluetooth music in the car.
(4).
106.2
QC3.0
PD20W
/CH
BT95
①
②
④
⑥
⑧
⑤
⑨
③
7
11
⑩
106.2
/CH
FCC statement
This device complies with Part 15 of the FCC rules.
Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may
Note: This equipment has been tested and found to
comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
