GE - General Electric ZV900SLSS Monogram 36" Glass Canopy Wall-Mounted Hood

User Manual - Page 6

For ZV900SLSS.

PDF File Manual, 12 pages, Read Online | Download pdf file

ZV900SLSS photo
Loading ...
Loading ...
Loading ...
6 49-80403 Rev. 6
CONTROLS
NOTE: Avoid using food products that produce flames
under the range hood.
1. POWER ON/OFF. Press to activate (turn on)/deactivate
(turn off) the control buttons. When the buttons are
active (turned on), their outer rings will be illuminated.
When active (turned on), the hood lights and fan will
automatically turn on at their last settings.
NOTES:
Always deactivate (turn off) the buttons when the
hood is not in use.
If both the LIGHT and FAN are set to OFF, the
buttons will automatically deactivate (turn off) after 10
seconds.
2. LIGHT DECREASE ON/OFF. Press to turn on and dim
the lights. It remembers the last light level used. The
buttons allow you to cycle around to the desired setting.
(There are four light levels/settings and OFF.)
3. LIGHT INCREASE ON/OFF. Press to turn on and
brighten the lights. It remembers the last light level
used. The buttons allow you to cycle around to the
desired setting. (There are four light levels/settings and
OFF.)
4. Display. Shows the fan setting.
5. FAN DECREASE ON/OFF. Press to turn on and
decrease fan settings. It remembers the last fan level
used. The buttons allow you to cycle around to the
desired setting. (Use to set the fan speed to LOW,
MED, HIGH, BOOST or OFF.)
6. FAN INCREASE ON/OFF. Press to turn on and
increase fan settings. It remembers the last fan level
used. The buttons allow you to cycle around to the
desired setting. (Use to set the fan speed to LOW,
MED, HIGH, BOOST or OFF.)
BOOST—Provides five minutes at the maximum fan
setting and then automatically sets to HIGH fan.
SENSOR FEATURE—The hood fan will automatically turn
on at the MED setting and the display will show AUTO
MODE ON if cooking temperatures become too hot. The
fan will stay on for a minimum of 3 minutes and will then
turn off when temperatures cool to an appropriate level.
LOCATE ON/OFF SWITCH. Grasp the filter handle,
press inward and then pull down. Remove charcoal filter,
if present. Reach into the motor compartment and locate
the ON/OFF push-button switch on the side of the motor.
Press switch to OFF position.
-
LIGHT+
-
FAN+
1 2 3 4 5 6
Push-button Switch
(vertical view from
inside opening)
CONTROLS AND FEATURES
Loading ...
Loading ...
Loading ...