Loading ...
Loading ...
Loading ...
5. Removeeithertoporbackwiringknockoutandinstall
approvedEmectrica_Cabme Cmamp.
tf hood is to be installed Non-Ducted:
e Purchase a set of Cmean Cooking FHters and attach
them to the aBuminum mesh fHterso
e Skip to Step 15or_ Page 10.
See page 4 for Clean Cooking FHter information.
Cmean Cooking Filters avaimable by caning Sears
at 1-800=4_MY=NOME _
ELECTRICAL
CABLE CLAMP
The renewing Steps (6 thru 14) are fer
DUCTED INSTALLATION ONLY.
6. Remove _ PaneB -held in place with (3) #8 screws
and (2) #8 screws, Disconnect light assembly wire har-
ness (white connector).
(3) #8 SCREWS MGHT
PANEL
7.
Remove Air Chute -held in place with one (1) screw.
NOTE: Be careful not to disconnect any wires.
8. Remove Baffle from air chute.
BAFFLE
AIR CHUTE
BAFFLE
\
Loading ...
Loading ...
Loading ...