Loading ...
Loading ...
Loading ...
4/4
8
A
170
B 280
C 280
D 240
E 520
F 450
H 580
I 730
AX-S 13G
Hp Volts Hz Ph
0,5 115 60 1
B
A
C
D
7
AX-S C13/N
C33F/N
AX-S 13/G
AX-S C13/N
C33F/N
Slicing capacity mm
LUBRICATION
The rod on which the product holder slides, which is underneath the slicer, should be weekly
properly lubricated.
The machine does not have an oiler hole. Lift up the machine and oil the rod directly. After the
lubrication have the carriage slide 4 or 5 times.
DO NOT use vegetable oil.
Occasionally, the slice thickness plate slide rod should be coated lightly with lubricant.
Turn the slice thickness control fully counterclockwise when lubricating this slide rod and then turn it
fully clockwise when finished.
DO NOT lubricate the rod on which the last slice device slides. It must be kept clean but not
lubricated.
The motor has sealed bearings and requires no lubrication maintenance.
WEAR ADJUSTMENT
After several, years of operation and many sharpenings of the blade it may become necessary to have
the slice thickness plate
14 adjusted closer to the blade.
Lift and rotate 180 degrees the
sharpener and reallocate it into
its initial position.
Lower the sharpener cover.
Cleaning of the grinding
wheels
To obtain an excellent sharpening
the grinding wheel must always be
clean.
Remove dirt and grease with
alcohol and the supplied special
brush.
Dimensions mm
Motor Data