Loading ...
Loading ...
Loading ...
5 INSTALL ACCESS PANEL
ASSEMBLY AND TOEKICK
• Place the toekick against the bottom of the
dishwasher.
• Place the access panel assembly against the
dishwasher and tighten the attached
screws.
• Re-install two original bottom screws
loosely. Adjust the toekick up or down and
tighten screws.
4 INSTALL CUSTOM ACCESS
PANEL
• Place 1/4" custom panel in position on the
access panel assembly. Use masking tape
to hold in position.
• Loosely, install 3 color matched screws into
the bottom of the access panel.
• Peel paper backing off the tape on the
bottom trim piece.
• Slip trim under screw heads and press the
trim against the bottom of the access panel.
Tighten screws.
• Remove masking tape.
• Position top trim against the custom panel
and form the ends over the sides of the
panel.
• Remove the trim and peel off the paper
backing on the tape.
• Reinstall the trim over the assembly.
• Use masking tape to hold the trim against
the panel on each side.
• Drill holes through the side trim holes and
into the access panel. Secure each side with
one screw.
• Remove masking tape.
Pub. No. 31-30500-2 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE DWG. NO. 206C1559P036
(ND 923-16) 2/04
Tighten
2 Screws
Loading ...
Loading ...
Loading ...