Loading ...
Loading ...
3 INSTALL DOOR PANEL TRIM
AND CUSTOM PANEL
• Remove the protective plastic covering from
side trim pieces.
• Slide “Z” shaped trim under the escutcheon.
• Place bottom trim against the bottom of the
door panel and drive center screw, then left
and right screws.
• Slide custom door panel under the “Z” trim
and bottom trim.
• The notch on the side trim pieces goes
towards the front. Slide side trim up and
under the escutcheon and over the edge
of the custom panel.
• Center punch and drill holes through the
holes in the side trim and into the dishwasher
door.
• Secure the trim to the door with color
matched screws provided. Remove tape.
• Use masking tape to hold trim tightly
against the custom panel.
A
B
C
D
F
E
3
“Z” Trim
Tape Trim
to Custom
Panel on
Each Side
Drill Holes
and Install
Screws
Loading ...
Loading ...
Loading ...