Loading ...
Loading ...
Loading ...
REATTACHING THE REFRIGERATOR DOORS
4. Connect the water line (_) and then insert a
clip on the coupler with pulling tube.
Connect the one connector(G ) on left side
door and two connectors (_) at each side
of the top cap.
_The clip is enveloped inside of the top cap.
Red Clip
Z_ The water line (l_) must be fully inserted to the marked line to prevent
CAUTIONwater leakage from the dispenser.
Line
5. Position the Top Table(_l) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert the
Top Table cap(Ill) and close the doors.
_When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
Sett _g Up 13
DA68-O1812G.indb 13 2009.8.10 9:7:58_AM
Loading ...
Loading ...
Loading ...