Loading ...
Loading ...
Loading ...
5
Care and Cleaning
w WARNING
Electrical Shock Hazard. Disconnect power before cleaning. Do
not immerse cord, plug, or base in any liquid.
1. Unplug.
2. Wash Removable Bean Hopper with Lid and Removable Coffee Grounds
container with Lid in hot, soapy water. Rinse and dry.
3. Wipe the outside of Burr Grinder with a soft, damp cloth.
4. Clean Grinding Wheel using Cleaning Brush. Do not immerse in water or
place in dishwasher. All parts must be dried thoroughly before next grind.
To Remove Bean Hopper and Grinding Wheel (not dishwasher-safe)
1. Unplug. Press down on lock and turn Bean Hopper counterclockwise to remove.
2. Lift Handle of Grinding Wheel and turn counterclockwise. Pull up to remove.
3. Clean with Cleaning Brush.
4. Place Grinding Wheel into center of Grinding Chamber. Turn clockwise to lock.
To Install Bean Hopper and Grinding Wheel (not dishwasher-safe)
1. Unplug.
2. Place Grinding Wheel into Grinding Chamber and turn clockwise until it clicks
into place. Push Handle to left or right to lay flat.
3. Add Bean Hopper to Chamber and turn clockwise until it clicks.
Troubleshooting
Grinder will not turn on.
• Make sure Bean Hopper with Lid and Grounds Container with Lid are in place.
Grind is too fine.
• Turn Adjustable Grind Setting counterclockwise to a coarser setting.
Coffee is too weak.
• Increase Cup Selector +/– Buttons amount for a stronger-tasting coffee.
ON (I)/OFF ( ) Button is flashing .
• Make sure Grounds Container with Lid and Silver Scale Cover are in place. Press Zero Button to clear and begin grinding.
Error Codes
• E01: Bean Hopper is not installed on Base. Follow “How to Use the Burr Grinder”.
• E02: Motor has overheated. Unplug and let cool 1 hour.
• b0: No beans in Bean Hopper or beans not feeding into Grinding Wheel. If needed, add beans or tap Bean Hopper to allow beans to feed into Grinding Wheel.
Loading ...
Loading ...
Loading ...