Loading ...
Loading ...
Loading ...
12. Install the E26-base LED bulb into the socket of the
light kit.
Important: Make sure you allow the bulbs and light kit
to cool before you replace the bulbs.
11. Attach the glass bowl to the light kit by twisting
the glass bowl tightly in a clockwise direction until it is
secure.
CAUTION: Avoid cross-threading the glass during
installation. Improper installation could cause the glass
bowl to be dicult to remove or fall, which could cause
serious injury.
Motor Screw
Light Kit
Light Kit
Glass Bowl
Fitter Plate
Fitter Plate
Screw
9-pin Connector
Blade Arm
ASSEMBLY INSTRUCTIONS
9
11
10
12
9. Install the blade arm to the underside of the motor
assembly with previously removed motor screws. Tighten
each blade arm completely before moving to the next.
10. Remove the three tter plate screws preassembled to
the tter plate. Then, connect the 9-pin connector from
tter plate to the 9-pin connector from the light kit.
Secure the light kit with the previously removed tter
plate screws.
7
Bulb
Glass Bowl
Loading ...
Loading ...
Loading ...