Loading ...
Loading ...
Loading ...
193
2. Feed the thermistor through the machine compartment and attach the connector to
the corresponding terminal on the main power board.
3. Reassemble the base and access covers in reverse order as they were removed.
19.2.3.8 Thermistor Harness Identification
1. Bin sensor, (orange) labeled: “Low Temp”
2. High side sensor, (red) labeled: “Defrost Evap.”
High side thermistor location: The
thermistor is fastened to the liquid
line at the filter drier with a nylon
wire tie.
High side thermistor location: The thermistor
is located on top of the filter drier inlet
(located behind the fill valve). The water valve
will have to be removed for access.
At the time of this publication; the
thermistor is a one piece assembly.
Replacing the thermistor will require
rerouting the thermistor wire to the
main control board in the machine
compartment.
Loading ...
Loading ...
Loading ...