Loading ...
Loading ...
Loading ...
Basic operation en
33
3. To insert the kneading hook:
‒ Insert the kneading hook with
the protective cap fitted in the
main drive.
‒ Turn the protective cap until the
kneading hook engages fully.
→Fig.
8
The protective cap must cover
the main drive completely.
7.6 Removing tools
▶
Pull the tool completely out of the
drive.
→Fig.
9
7.7 Attaching bowl lid
Requirements
¡ The required tool is used here.
¡ The bowl has been inserted.
¡ The swivel arm is closed.
1. Press the release button, raise the
swivel arm slightly and hold in
place.
→Fig.
10
2. Lift the lid slightly at the front, slide
fully onto the bowl and set down.
→Fig.
11
The filling shaft must face towards
the front.
3. Push the swivel arm down until it
engages.
→Fig.
12
7.8 Removing bowl lid
1. Press the release button, raise the
swivel arm slightly and hold in
place.
2. Lift the lid slightly at the front and
pull it out towards the front.
3. Push the swivel arm up until it en-
gages.
7.9 Processing
You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Setting Use
1-2 Stir in and mix ingredients.
1-2 Knead heavy dough, e.g.
yeast dough.
3-4 Beat and stir ingredients,
e.g. whipped cream.
Processing ingredients with tools
WARNING
Risk of injury!
Rotating drives, tools or accessory
parts may cause injury.
▶
Keep hands, hair, clothing and
utensils away from rotating parts.
▶
Only attach and remove tools and
accessories once the drive has
stopped and you have unplugged
the appliance.
▶
Before changing tools or cleaning
the appliance, switch off and dis-
connect it from the mains.
▶
Only use the tools when the bowl
is inserted, the lid is fitted and the
drive covers are in place.
▶
Switch on the appliance only if all
preparations are complete and the
swivel arm is engaged in the posi-
tion described.
▶
Never open the swivel arm during
processing.
▶
Never leave the appliance
switched on if the power supply is
interrupted. The appliance will
automatically start up again follow-
ing the interruption in the power
supply.
Loading ...
Loading ...
Loading ...