Loading ...
Loading ...
Loading ...
www.CasablancaFanCo.com
1.888.227.2178
19
M8535-01 • 02/10/16 • © 2015 Casablanca Fan Company
Troubleshooting
Excessive wobbling
• Tighten all of the blade screws
until they are snug.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to balance
the fan.
Noisy Operation
• Tighten the blade screws until
they are snug.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Fan doesn’t work
• Press a fan speed button (1-4).
• Check the circuit breaker to
ensure the power is turned on.
• Check the wall control battery.
• Make sure that you have paired
the wall control.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 9.
Remote doesn’t work
• Make sure the battery is
installed correctly and with the
proper polarity.
• Make sure you have paired the
remote.
• Install a fresh battery in the wall
control.
AUTHORIZED SERVICE
CENTERS
For the most updated list of
Casablanca Authorized Service
Centers, visit
www.CasablancaFanCo.com or
call toll free 1-888-227-2178.
LED lights will not dim
• To enable dimming, you
must rst set your remote to
dimming mode. Remove the
battery door and move the
toggle switch to “D” for full-
range light dimming (or “ON”
for on/off function only).
Fan speeds are incorrect
• Turn power from the circuit
breaker off and back on, then
run the fan on speed “6” for at
least 90 seconds and check the
fan speeds again.