Loading ...
Loading ...
Loading ...
www.CasablancaFanCo.com
1.888.227.2178
Make sure the lower switch housing is securely attached to the
upper switch housing. Failure to properly secure all 3 assembly
screws could result in the light xture falling.
LED Assembly
Insert the third screw, found in
the hardware bag, into place and
then tighten all three screws.
Screw two light kit assembly screws
from the hardware bag halfway into
the upper switch housing. Push any
excess wiring into the switch housing,
then wrap the keyhole slots in the LED
assembly around the screws and twist
counterclockwise.
Connect the single-pin connectors from
the LED assembly to the connectors
from the fan.
Note: If you are installing the optional
no-light cap, please skip this step and
instead use the dummy connectors to
cap the two wires coming from the fan.
Light Kit
Assembly
Screw
13
M8535-01 • 02/10/16 • © 2015 Casablanca Fan Company
Loading ...
Loading ...
Loading ...