Loading ...
STEP 1:
Place the left back panel
(item 5)
and right back panel
(item 6) together
on a level surface.
Attach right back
panel to left back
panel by engaging the
holes on the left back panels
with the corresponding hooks
on right back panel.
STEP 2:
Attach left and right back panels to left and right side panels
(item 3 and 4) by engaging the holes on the side panels with the
corresponding hooks on back panels.
STEP 3:
Insert the top panel (item 1)
into the side and back panels. Lay
the cabinet at on the ground if
necessary.
STEP 4:
Insert the bottom panel
(item 2) into the side and back
panels. Lay the cabinet at on the
ground if necessary.
STEP 5:
Use packaging material to protect the unit. Attach the leg leveller
(item 13) to foot holder (item 12). Insert bolt
M8 x 16mm (item 14) through the foot holder into the cabinet.
STEP 6:
Attach the front and side kick panel (item 9 and 10) to foot
holder with bolt M6 x 16mm (item 15).
STEP 7:
Obliquely place the four shelf panels
(item 11) in the cabinet, secure the
shlef panels at four desired heights
by carefully inserting the shelf edges
into the anges on left and right side
panels. Make sure each shelf is level.
STEP 8:
Place the at washer (item 16) into the hinge pin, algin the hinge
pin on the bottom of the door with the hole on bottom panel,
slowly and carefully insert the hinge pin into the hole. Algin the
hinge pin on the top of the door with the hole on top panel, slowly
and carefully insert the hinge pin into the hole.Repeat the step
above to complete the right door assembly.
drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK.