Loading ...
Loading ...
Loading ...
Dryir_ Procedures
• Followthe guidelines below for preparing the load _or drying,
• Read the _tin_ Znstructicns card for operating your specific model.
• Alwaysread and follcmfahriccare labelsand laumdryproalJctlabels.
Follow fabric care label instructions
Place small items in a mesh bag.
Fill dryer drum 1/3 to 1/2 full,
[I_I'A'/:IIt_II_I_'I To reduce the risk of fire, electrical shock, or injury to persons, read
Zn!3orta_ Safety Instrom:iGns, pages 2-3, before operating this dryer.
l Prepare itlm_ for drying.
• Dry items of similar fabric, weight and construction in the same load.
• Separate dark items from lighbcolored items. Separate items that shed lint
from those that attract tint. If an item sheds lint, turn it inside out,
• Besure buckles, buttons andtdm are heatproof and won't damage the drum
finish, Closezippers, fasten hooks and Velcroe -like fasteners. Tie strings and
sashesto prevent snagging and tangling.
• If possible, turn pockets inside out for even drying,
• Check for stains which may not have been removed in washing, Dryer heat
may permanently set some stains. Repeat stain removal process before
drying.
• Placesmall items in a mesh bag to prevent tangling and for easy removal.
Z Check that lint screen is clean and in place.
5
Lead the dry_.
The average load will fill the drum 1/3 to 1/2 full. Items need room to tum ble
freely for even drying and less wrinkling. Do not overload dryer.
When drying large items, dry only 2 or 3at atime, Filloutthe load with small
and medium sized items.
Fordelicate or very small loads, add 2 linbfree towels for better drying, less
wrinkling, and to prevent grease stains caused by fabric softener sheets.
Do not overdry items, Overdrying can causewrinkling, shrinkage, harshness,
and a build-up of static electricity, which can produce more lint,
If desired, add a dryer fabric softener sheet.
Close the dryer door and set dryer ccntrols (some models).
See Olin-ratingInstructicmscard for your specific model controls,
Turn cycle selectc_ clc_._wise to th_ desired settirg.
6
Stazt tha A?E-.
PushStart Button for 2seconds orturn the STARTknob clockwise to ON, hold
for 1-2 seconds and release.
To add or remove items when the dryer is running, open the door, The dryer
will always stop when the door is opened, Allow the drum to come to a
complete stop before reaching inside,
To restart dryer, close the door then push the Start Button for 2 seconds or
turn the STARTknob clockwise to ON, hold for 1-2 seconds and release.
The dryer will not start if the cycle selector is in the OFFposition,
7. When the cycle ends, remove items inmediately and hang
cr fold.If load is removed before the cycle ends, turn cycle selector to OFF.
4
Loading ...
Loading ...
Loading ...