Loading ...
Loading ...
Loading ...
en HomeConnect
24
6. If the temperature display (freezer
compartment) shows , reset the
HomeConnect settings.
→"Resetting HomeConnectset-
tings", Page24
Checking the signal strength
You should check the signal strength
if no connection could be estab-
lished.
1. Press
.
a The temperature display (refriger-
ator compartment) shows
.
2. Press
/ (Refrigerator compart-
ment) repeatedly until the temper-
ature display(refrigerator compart-
ment) shows .
a The temperature display (freezer
compartment) shows a value
between
(no reception) and (full
reception).
Note:The signal strength should be
at least
.
Improving the reception
If the signal strength is too weak, the
connection may be interrupted.
▶
Carry out one of the solution op-
tions:
‒ Place the router and refrigerator
closer together.
‒ Ensure that the connection is
not interfered with by screening
walls.
‒ Install a repeater to strengthen
the signal.
Installing the Home Connect
software update
The appliance searches for updates
to the HomeConnect software at reg-
ular intervals.
Note:If updates are available, the
temperature display (refrigerator
compartment) shows
.
To reset the update and the temper-
ature display (refrigerator compart-
ment) to the set temperature, press
any touch field.
1. Press .
a The temperature display (refriger-
ator compartment) shows
.
2. Press
/ (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows and the temperat-
ure display(freezer compartment)
shows .
3. Press
/ (Freezer compartment).
a The temperature display (freezer
compartment) shows an animation.
a The update is installed.
a The controls are locked during the
installation.
a If the installation is successful, the
temperature display (freezer com-
partment) shows
.
4. If the temperature indicator (freezer
compartment) shows
, the appli-
ance was unable to install the up-
date.
‒ Repeat the process at a later
point.
5. If the update cannot be completed
after several attempts, contact the
After-sales service →Page38.
Resetting HomeConnectset-
tings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
Loading ...
Loading ...
Loading ...