Loading ...
Loading ...
Loading ...
- 8 -
11/2020
Copyright © 2020, Fast ČR, a.s.
EN
Robotic vacuum
cleaner
User'smanual
BEFORE FIRST USE
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Main switch
A2 Bumper bar with an anti-collision
sensor
A3 Power adapter connector socket
A4 Main switch
A5 Dust container
A6 2-in-1 mop unit
Consists of awater tank, dust
container and amop fabric
A7 Container release latch
A8 Charging contacts
A9 Front swivel wheel
A10 Bottom anti-fall sensor, central
A11 Left rotary brush (L)
A12 Bottom anti-fall sensor, left
A13 Left motorised rubber wheel
A14 Bottom anti-fall sensor, right
A15 Right rotary brush (R)
A16 Right motorised rubber wheel
A17 Battery compartment cover
A18 Central rotary brush compartment
A19 Suction hole
A20 Central rotary brush cover
A21 Central rotary brush
B1 Power adapter
B2 Power adapter plug
B3 Power indicator
B4 Charging station
B5 Charging contacts
B6 Power adapter plug socket
C1 Remote control
C2 Display
C3 Scheduled cleaning setting mode
C4 Return to the charging station
button
C5 Forward button
C6 Left button
C7 Right button
C8 Reverse button
C9 Vacuum cleaner start / off button
C10 Cleaning mode selection button
C11 Time setting button
C12 Maximum cleaning mode in which
the vacuum cleaner cleans
until the battery is almost flat.
C13 Battery compartment cover
C14 Battery compartment
(2pcs AAA × 1.5V)
D1 Dust container
D2 Water tank
D3 Mop fabric
D4 Mop fabric fastening velcro strips
D5 Filling opening cap
D6 Container contacts
E1 HEPA filter holder
E2 HEPA filter
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
E3 Cleaning brush
F1 HEPA filter holder F2 HEPA filter
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
G1 Latches
G2 Rotary brush cover
G3 Rotary brush
G4 Brush bearings
PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM
CLEANER
■ The robotic vacuum cleaner is intended for cleaning various types of hard floors
such as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with alow
pile height. While vacuuming, it effectively combines various routes to optimally
clean the entire floor area.
■ The suction hole effectively removes hair, animal fur, etc. The two side rotary brushes
brush dirt out of hard-to-reach places along walls and furniture and out of corners.
The motorised rubber wheels protect sensitive floors against scratching and can
travel over threshold strips up to aheight of 1 cm and ride on to a2 cm high carpet.
■ The suspended bumper enables the vacuum cleaner to dampen the approach to an
obstacle and to efficiently clean around it. The infrared sensors in the front bumper
prevent the vacuum cleaner from colliding with obstacles. Safe operation in rooms
with stairs is made possible by the bottom anti-stair-fall sensors.
■ Another advantage the a robotic vacuum cleaner is the mop function, which
enables dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum
cleaner vacuums small bits of dirt and dust from the floor to prevent the mop fabric
from being excessively soiled during the cleaning cycle. When the vacuum cleaner
finishes cleaning, it will automatically shut off the supply of water and thereby limit
it leaking on to the floor.
■ For easy identification of the operating state, the button on the cover has an
indicator light the colour of which indicates low battery voltage, battery charging,
full charge and operation, and others. Apart from the indicator lights, the vacuum
cleaner also has audio signals that accompany certain functions or error states of
the vacuum cleaner, see chapter MEANINGS OF AUDIO AND LIGHT SIGNALS OF THE
VACUUM CLEANER.
■ The remote control facilitates convenient control, enabling the vacuum cleaner
to be turned on and off, to be set to the automatic cleaning mode, to select an
operating mode, to send the robotic vacuum cleaner to the charging station or to
set scheduled cleaning.
■ The vacuum cleaner is equipped with GYRO MAPPING function (orientation in
space), which can identify the space geometry of a room in which it is cleaning,
thereby the vacuum cleaner is able to better clean the floor. This is abuilt-in function
and cannot be affected in any way.
PREPARING THE ROBOTIC VACUUM CLEANER FOR OPERATION
INSTALLING AND USING THE ROTARY BRUSHES
■ The rotary brushes A11 and A15 are intended for smooth floor surfaces and ensure
effective cleaning in corners, along walls and furniture.
■ Turn the vacuum cleaner upside down. Gradually push the rotary brushes precisely
and with force on to the pins that are intended for them. While doing this, make sure
that the marks L and R both on the brushes and on the vacuum cleaner match. Turn
the vacuum cleaner back over to the operating position.
■ When using the robotic vacuum cleaner to clean rooms with carpets, remove the
rotary brushes. When removing them, proceed in the reverse sequence to their
installation.
INSERTING AND REMOVING THE BATTERY
■ The vacuum cleaner is equipped with a Li-ion battery. If the battery is packed
separately, it is necessary insert it into the vacuum cleaner before first use. Use only
the original battery type.
■ Make sure that the vacuum cleaner is turned off with the main switch A4. Turn the
vacuum cleaner upside down and screw off the cover A17.
■ Remove the vacuum cleaner connector from the battery compartment. Connect the
battery connector to it. The battery can only be connected in one direction.
■ Screw the cover A17 back on and turn the vacuum cleaner back over to the
operating position.
■ Remove the battery in reverse sequence. Prior to removing it, always check that the
vacuum cleaner is turned off using the main switch. The fabric strips on the body of
the battery make battery removal easier.
■ When the vacuum cleaner will not be used for an extended period of time, take out
the battery and store it in adry, clean and cool place out of children'sreach.
LOCATION OF THE CHARGING STATION
■ The charging station B4 serves to automatically recharge the battery and the
vacuum cleaner must have good access to it.
■ Locate the charging station against awall on ahard, even and dry surface within
reach of a power socket. Make sure that there are no stairs or obstacles within
adistance of 1m on the left and right of the charging station and within adistance
of 2 m in front of the charging station, that would prevent the vacuum cleaner from
finding the charging station and docking successfully.
■ Insert the power adapter plug B2 into socket B6 of the charging station, and insert
the power cord plug into apower socket. Place the power cord in such away that it
does not tangle into the cleaning brushes of the vacuum cleaner.
■ In the event that the vacuum cleaner is not used for an extended period of time,
disconnect the charging station from the power socket and store it in adry, clean
and cool place.
CHARGING THE BATTERY FOR THE FIRST TIME
Note:
Prior to charging the battery, the vacuum cleaner must be turned on
using the main switch A4.
■ Before using the vacuum cleaner for the first time, it is necessary to fully charge the
battery for at least 12 hours.
■ Check that the charging station B4 is correctly positioned and connected to apower
socket according to chapter Location of the charging station. Turn on the main
switch A4 of the vacuum cleaner, grasp the robotic vacuum cleaner and manually
place it into the charging station so that the charging contacts A8 on the underside
of the vacuum cleaner and the charging contacts B5 on the charging station are
connected. When the contacts are connected, the charging process will start.
■ The robotic vacuum cleaner can also be charged without using the charging station.
Insert the plug B2 of the power adapter B1 into socket A3 of the vacuum cleaner,
and insert the power cord plug into apower socket.
■ During the charging process, the indicator light on button A1 will flash pink.
■ When the battery is fully charged, the indicator light of button A1 will remain
permanently lit blue and the process will end automatically. The robotic vacuum
cleaner is now ready for use.
Loading ...
Loading ...
Loading ...