Loading ...
Loading ...
Loading ...
User instructions
11
SELF CLEAN
Dishwasher cleaning cycle. The cycle should be started with the machine
empty, without dishes. It is recommended to run the program every 2-3
months, using special dishwasher detergents. The light flashes during
operation. At the end of the cycle it remains on and cycle lights 4 and 5
flash. The display (if available) shows “End”.
DELAY
Allows you to program the dishwasher cycle to start during the required time
period (e.g. night). Press the DELAY button to activate the option. The
following appears on the display: 1:h (the relevant light turns on). Pressing
the button repeatedly will allow you to select the required delay of up to
12/24 hours depending on the model. Press the START/PAUSE button
until the light of the selected cycle starts to flash. The dishwasher will carry
out a pre-wash cycle, after which the set “cycle delay” option will be
activated. The option cannot be selected once the cycle is running. To
cancel the setting:
- Press the START/PAUSE button until the light of the selected cycle stops
flashing;
- Press the DELAY button until the setting on the display returns to zero;
-
Press the
START/PAUSE
button to start the cycle immediately.
“CHILD LOCK” OPTION
By pressing the indicated buttons (3) at the same time, the controls are
locked, which is confirmed when the warning light on display turns on. This
option stays active until the buttons
(3)
are pressed again.
Loading ...
Loading ...
Loading ...