Loading ...
Loading ...
Loading ...
Most laundering problems are easily solved if you understand the cause,
Check these lists for common laundry and washer problems, If you need
further assistance, see the back cover.
Problem Possible Cause Solution
Washer Leaks Household plumbing isleaking. Repairplumbing.
Inlet hoses not tight. Tighten hoses (see "Installation
Instructions").
Inlet hose washers not Reseatwashers (see "Installation
properly seated. Instructions").
Drain hose not properly Clamp drain hose (see "Installation
clamped or is oft. Instructions").
Drain is clogged. Remove drain clogs. Sink, standpipe
or floor drain must be able to handle
17 gal. (64 L) of water per minute.
Tub moved forward dudng Ensuretub is centered before
unloading, causing waterto starting washer.
deflect off tub ring.
Unit not levelcausing water Ensurefront feet are installed and
to deflect offtub ring. nuts are tightened. Level washer.
Reset rear legs (see "Installation
Instructions").
Loadis unbalanced. Spray Redistributethe load.
rinsesare deflecting off load.
Washer is overloaded. Fills or Reduce load size.
spray rinses are deflecting off
load.
Won't Drain/ Drain hose is kinked or Straightenor unplug hose(see
Won't Spin/ clogged. "Installation Instructions").
Wet Loads Correct operation of After a wash or rinse,the washer will
neutraldrain, drain without spinning.After draining,
the spinning begins.
Lid is open. Closethe lid.
Drain hose is more than Lower drain hose (see "Installation
96 in (2.4 m) above floor. Requirements").
Too much detergent - Use less detergent.
excessive sudsing.
Wrong cycle for load Choose acycle with a higher spin
beingwashed, speed (see "Washer Use").
25
Loading ...
Loading ...
Loading ...