Loading ...
Loading ...
Loading ...
ADJUSTMENTS
Shift Cable
If thefull rangeof speeds(forwardand reverse)cannotbe achieved,
referto the figureto the rightand adjustthe shift cableas follows:
1. Placethe shiftleverin thefastest (F6) forwardspeedposition.
2. Loosenthe hex nuton the shiftcable indexbracket.SeeFigure
19.
3. Pivotthe bracketdownwardto takeupslack inthe cable.
4. Retightenthehex nut.
Drive Control
Whenthedrivecontrol is releasedandin thedisengaged"up"position,
the cableshouldhaveverylittle slack.It shouldNOTbetight. Also,
if thereis excessiveslackin thedrive cableor if the unitexperiences
intermittentdrivewhileusing,the cable mayneed to be adjusted.
Checktheadjustmentof the drivecontrolas follows:
1. Withthedrivecontrol released,pushthe snowthrowergently
forward.The unitshouldroll freely.
2. Engagethe drivecontroland gentlyattemptto pushthe snow
throwerforward.Thewheelsshouldnotturn. The unitshouldnot
rollfreely.
3. With thedrivecontrol released,movethe shift leverbackand
forthbetweenthe R2positionand the F6 positionseveraltimes.
Thereshouldbe no resistancein the shiftlever.
4. If anyof the abovetests failed,the drivecable is in needof adjust-
ment.Proceedas follows:
5. Loosenthe lowerhexbolt onthe drivecable bracket.See Figure
20.
6. Positionthe bracketupwardto providemoreslack(or downward
to increasecabletension).
7. Retightenthe lowerhex bolt.
Chute Bracket
If the spiralat the bottomof the chutedirectionalcontrol is notfully
engagingwiththe chuteassembly,the chute bracketcan beadjusted.
Todo so:
1. Loosenthe two nutswhichsecurethechutebracketand reposi-
tion it slightly.See Figure21.
2. Retightenthe nuts.
Figure19
f
Figure20
f
19
Figure21
Loading ...
Loading ...
Loading ...