Craftsman CMMT43549 3/8-in Drive 19mm 6 Point Shallow Socket

User Manual - Page 4

For CMMT43549.

PDF File Manual, 32 pages, Read Online | Download pdf file

CMMT43549 photo
Loading ...
Loading ...
Loading ...
English
2
20V Max* Fan
CMCE001
Additional Safety Information
WARNING: Never modify the power tool or any part
of it. Damage or personal injury couldresult.
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or dust
mask if operation is dusty. ALWAYS WEAR CERTIFIED
SAFETYEQUIPMENT:
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
ANSI S12.6 (S3.19) hearing protection,
NIOSH/OSHA/MSHA respiratoryprotection.
WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to the State
of California to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicalsare:
lead from lead-based paints,
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-
treatedlumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopicparticles.
Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing
dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmfulchemicals.
WARNING: Use of this tool can generate and/
or disperse dust, which may cause serious and
permanent respiratory or other injury. Always use
NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles
away from face andbody.
WARNING: Always wear proper personal hearing
protection that conforms to ANSI S12.6 (S3.19)
during use. Under some conditions and duration
of use, noise from this product may contribute to
hearingloss.
Specific Safety Rules for Fans
WARNING: Fire hazard. Do not operate fan
near flammable liquids or in gaseous or explosive
atmospheres. Internal sparks may ignite fumes
causing personalinjury.
Do not operate the fan with a damaged cord.
For indoor use only.
To reduce the risk of serious personal injury, follow the
directions in suspending/Mounting the Fan and
Versatrack™ when suspending the fan.
Do not wash fan with water or allow water to get inside
the fan. Do not submerge fan in water at anytime.
While fan is in use, do not cover with cloth or other
flammable materials due to increased risk offire.
Store the fan indoors when not inuse.
Make sure extension cord is located so that it will not
be stepped on, tripped over, or otherwise subjected to
damage orstress.
Use only a proper extension cord that is necessary
to operate the fan on AC power. Use of an improper
extension cord could result in risk of fire, electric shock,
orelectrocution.
Disconnect the fan from the outlet before attempting
any cleaning. This will reduce the risk of electric shock.
Removing the battery pack will not reduce thisrisk.
Important Safety Instructions
WARNING! When using the fan, basic
precautions should always be followed, including the
following:
a ) Read all the instructions before using the fan.
b ) To reduce the risk of injury, close supervision is
necessary when a fan is used nearchildren.
c ) Turn the fan off, disconnect from power source and
remove the battery packs when not in use and before
servicing orcleaning.
d ) Do not operate any fan after it malfunctions
or is dropped or damaged in any manner. Turn
the fan off, disconnect from power source and
remove the battery pack. Return fan to the nearest
authorized service facility for examination, repair, or
electrical or mechanicaladjustment.
e ) To reduce the risk of electrical shock, do not put
fan in water or other liquid. Do not place or store
fan where it can fall or be pulled into a tub orsink.
f ) Only use attachments recommended or sold by
themanufacturer.
SAVE THESE INSTRUCTIONS
The fan is designed to operate on 120 Volts, 60 Hz AC or
on direct current (DC) through fully charged CRAFTSMAN
20V Max* lithium-ion battery packs. Do not use any
othervoltage.
WARNING: Do not use the fan with any solid-
state speed controldevice.
Use type SJ, SJO, SJT, SJTO, S, SO, ST and STO cord when
operating the fan on ACpower.
Loading ...
Loading ...
Loading ...