Loading ...
Loading ...
Loading ...
Unpacking and Examining Your Oven
Carefully remove oven from carton. SAVE THE CARTON AS IT MAY MAKE
INSTALLATION EASIER,
Remove:
1. alI packing materials from inside the oven cavity; however DO NOT REMOVE
THE WAVEGUIDE COVER, which is located on the ceiling in the oven cavity,
Check to see that there are Installation Instructions, Wall Template and Top Tern- Oven
plate. Read enclosures and SAVE the Operation Manual. Hinges cavity
2. the feature sticker from the outside of the door, if there is one. Latches Doorsealsand
sealing surfaces
Check the oven for any damage, such as misaligned or bent door, damaged door
seals and sealing surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door, tf
there is any damage, do net operate the oven and contact your dealer or SHARP AUTHORIZED SERVICER.
See Installation Instructions for more details.
Two optional accessories are available for this oven.
1. Charcoal Filter (RK-220). This is required when hood exhaust is recirculated. See Charcoat Filter on page 26. To
order filter replacement, if dealer does not stock this item, it can be ordered by calling 1-800-642-g122.
2. Filler Panel Kit. For use when the oven is installed in a 36-inch or 42-inch wide opening. The metal filler panels
come in 3-inch wide pairs. One set is needed for a 36-inch opening and 2 sets for a 42-inch opening. White and
black are available.
To purchase contact: ModermAire Ventilating Corporation
7319 Lankershim Blvd.
North Hollywood, CA 91605
Phone: (818) 765-9876
Fax: (818) 765-4916
This appliance must be grounded. This oven is equipped with a cord having a grounding wire with a grounding plug.
It must be plugged into a wail receptacle that is properly installed and grounded in accordance with the National
Electrical Code and local codes and ordinances. In the event of an electrical short circuit, grounding reduces risk of
electric shock by providing an escape wire for the electric current.
WARNING - Improper use of the grounding plug can result in a risk of electric shock.
Electrical Requirements 3-_o,,_P,_g
Check Installation Instructions for proper location for the power supply
The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. or more protected
electrical supply. It is recommended that a separate circuit serving only the oven be
provided. GroundingP_,
The oven is equipped with a 3-prong grounding plug. It must be plugged into a walI 3-P_o,_gR_-_t_o_e
receptacle that is properly installed and grounded. DO NOT UNDER ANY CtRCUM-
Ground
STANCES CUT OR REMOVE THE GROUNDING PIN FROM THE PLUG. Ro_p_i_Bo_
Notes: 1. If you have any questions about the grounding or eIectrical instructions_ consult a qualified electrician or
service person.
2. Neither Sharp nor the dealer can accept any liability for damage to the oven or personal injury resulting
from failure to observe the correct electrical connection procedures.
Radio or TV Interference
Should there be any interference caused by the microwave oven to your radio or TV, check that the microwave
oven is on a different electricaI circuit, relocate the radio or TV as far away from the oven as feasibte or check
position and signal of receiving antenna.
Loading ...
Loading ...
Loading ...