Loading ...
Loading ...
Loading ...
22
Fig.5.2
Fig.5.1
CORRECT REPLACEMENT
OF THE SEMI-RAPID
BURNERS
It is very important to check that the
burner flame spreader “F” and the cap
“C” have been correctly positioned (see
figs.5.1and5.2).
Failure to do so can cause serious
problems.
CORRECT POSITION OF
THE DUAL AND TRIPLE
RING BURNERS
The burner must be correctly positioned
(see figs. 5.3-5.4); the burner rib must
befittedintheirhousingasshownbythe
arrow.
Theburnercorrectlypositionedmustnot
rotate(fig.5.5).
Thenpositionthecap"A"andthering"B"
(figs.5.5-5.6).
Fig.5.3
BURNERS AND GRIDS
• These parts can be removed and
cleanedwithappropriateproducts.
• Aftercleaning,theburnersandtheir
amedistributorsmustbewelldried
andcorrectlyreplaced.
• It is very important to check that
the burner flame distributor and the
cap has been correctly positioned -
failure to do so can cause serious
problems.
• Check that the probe “T” (figs. 5.1-
5.3-5.4)nexttoeachburnerisalways
cleantoensure correct operationof
thesafetyvalves.
• Check that the electrode “S” (figs.
5.1-5.3-5.4) next to each burner is
always clean to ensure trouble-free
sparking.
• Note: To avoid damage to the
electric ignition do not use it when
the burners are not in place.
Both the probe and ignition plug must
be very carefully cleaned.
TRIPLE-RING BURNER
S
F
C
T
S
T
5
Loading ...
Loading ...
Loading ...