Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/47489163-vdfsge365gb/bg15.png)
21
WARNING
Electrical Shock Hazard
Plug into a grounded 3-prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
3-prong polarized
ground-type outlet
ground
prong
GENERAL RECOMANDATION
• Important: Before any operation of cleaning and maintenance disconnect the
appliance from the electrical supply.
• Itisadvisabletocleanwhentheapplianceiscoldandespeciallyforcleaningthe
enamelledparts.
• Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the
surfaces.
• Avoidusingcleaningproductswithachlorineoracidicbase.
• The oven must always be cleaned after every use, using suitable products and
keeping in mind that its operation for 30 minutes on the highest temperature
eliminatesmostgrimereducingittoashes.
WARNING
When correctly installed, your product meets all safety requirements laid down
for this type of product category. However special care should be taken around
the rear or the underneath of the appliance as these areas are not designed or
intended to be touched and may contain sharp or rough edges, that may cause
injury.
ENAMELLED PARTS
• Alltheenamelledpartsmustbecleanedwithaspongeandsoapywaterorother
non-abrasiveproducts.
• Drypreferablywithamicrobreorsoftcloth.
• Acidic substances like lemon juice, tomato sauce, vinegar etc. can damage the
enameliflefttoolong.
PAINTED PARTS AND SILK-SCREEN PRINTED SURFACES
• Cleanusinganappropriateproduct.Alwaysdrythoroughly.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and
abrasion.Youareadvisedtouseasoftclothandneutralsoap.
STAINLESS STEEL ELEMENTS
• Stainlesssteelpartsmustberinsedwithwateranddriedwithasoftandcleancloth.
• Fordifcultdirt,useaspecicnon-abrasiveproductavailablecommerciallyoralittle
hotvinegar.
• Note: regular use could cause discolouring around the burners, because of
the high ame temperature.
INSIDE OF OVEN
Theovenshouldalwaysbecleanedafterusewhenithascooleddown.
Thecavityshouldbecleanedusingamilddetergentsolutionandwarmwater.
Suitable proprietary chemical cleaners may be used after first consulting with the
manufacturersrecommendationsandtestingasmallsampleoftheovencavity.
Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity
surface.
NOTE: The manufacturers of this appliance will accept no responsibility for damage
causedbychemicalorabrasivecleaning.
Let the oven cool down and pay special attention no to touch the hot heating
elements inside the oven cavity.
cleaning and maintenance
Do not use steam jet cleaners
because the humidity could
infiltrate into the appliance making
it dangerous.
Before any operation of maintenance
disconnect the appliance from the
electrical mains supply.
WARNING
VERY IMPORTANT
5
Loading ...
Loading ...
Loading ...