Loading ...
Loading ...
Loading ...
| 26 |
Follow the instructions below to keep your washer clean and working reliably for a long time.
► Remember to unplug the power cord before cleaning the washer.
- May result in an electric shock and/or injury.
► Do not spray water directly on the product.
- May result in short-circuiting and/or an electric shock.
Warning
■Cleaning the detergent and fabric-softener drawer
■Cleaning the drum
■Cleaning the washer
■Cleaning the drainage filter
•
Insert a finger into the hook at the front of
the drawer, pull the drawer out, and then
clean it using water.
※ Never use a powdered detergent.
(May result in a malfunction and/or leak.)
※ Clean the areas indicated in the diagram.
※ Allowing contaminants and residue to build inside the
drawer or around its opening can cause the washer to malfunction.
• Rust: Using water containing rust particles, washing metallic objects like hairpins, and filling the drum with water
and letting it sit for a long time are all causes of rust formation.
• Rust Removal: Wipe the rust off using a piece of soft cloth or a sponge with a commercially available rust-
removal cream. ※ Using a metallic scrubber will further damage the drum.
• Detergent Residue: Prolonged use of the washer without cleaning and use of excessive amounts of detergent
cause dark and patchy detergent residue to form inside the drum. This residue can affect the
wash quality and even end up staining clothes. Use the Tub Clean course to clean the inside
of the drum.
•
Clean the product using a
damp piece of cloth.
•
The drainage filter needs to be periodically removed and cleaned.
•
Unplug the power cord first and make sure the washer is turned off before removing and cleaning the filter.
Cleaning
Clean the bottom Clean the bottom
Clean along the edges Clean the rubber seal
-
Do not use household synthetic detergent, benzene, or
paint thinner to clean the product. Doing so will
damage the plastic parts.
-
If using a chemical cleaning agent, follow all precautions
provided by the manufacturer.
Caution
-
Some water may leak out from the product. Have a container ready to catch the water and
remove the cap filter.
-
Removing the filter while the washer is in operation may result in hot water spewing out and
causing a burn. Please be careful.
Caution
① Undo the highlighted screw
using a screwdriver.
② Grab the cap filter's handle,
turn the filter, and pull it towards
you to remove it.
③ Clean the indicated parts of the
cap filter and the filter opening.
__Washer_DWD-M253CW__.indd 26 2021-04-13 3:24:53
Loading ...
Loading ...
Loading ...