Loading ...
Loading ...
Loading ...
Control Button Features
SELECTOR CONTROL KNOB- Use to select the Bread Proof,
Warm & Hold, Bake, Convection Bake, Convection Roast,
Broil or Clean Feature.
READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide.
OVEN TEMPERATURE CONTROL KNOB-- Use to
select the Bread Proof, Warm & Hold, or the
required Bake, Convection Bake, Convection Roast,
Broil or Clean Temperature.
BREAD PROOF-- Used to set
the Bread Proof feature.
I
CLEAN--
Used to select
the Self-
Cleanim
cycle.
BROIL--
Used to
select
broil
CONVECTION
ROAST-- Used
to select the
convection
roasting mode.
BAKE-- Used
to select the
bake function.
CONVECTION
BAKE-- Used to
select the Convection
Bake feature.
OVEN TEMPERATURE
INDICATOR -- This indicator
shows the current set temperature
in the oven.
SCROLL
PADS--
Used to scroll
up or down
for many
functions.
............... D
OVEN INTERIOR I ............... PROBE PAD-- Used to set
I L;LUL;_ _=1 HAU-- used ....
LIGHT PAD-- m .- ....... the _'roDe[ea[ure.
..... m 1:0se1:1:ne1:line of day.
used 1:0]:urn |
oven interior light TIMER PAD-- Used to set or cancel the minute timer.
ON and OFF.
The minute timer does not start or stop cooking.
_CONVECTION CONVERT-- Used to
select the Convection Convert feature.
Setting the Clock
Clo_k
The button is used to set the clock. Until the clock is set, all the other oven functions will not be available. The clock
may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation.
When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash
with "PF" (Power Failure).
Clo_k
When PF flashes in the display, press the button. No other button will stop the time from flashing.
To set the clock
('loc_
1. Press the Eli button. The control will beep once and the time of day will appear in the display.
2. To set the clock to the current time of day, press the or button to increase or decrease the time of day in 1
minute increments, or keep the or button pressed to increase or decrease the time of day in 10 minute
increments.
3. Release the button when the desired time is reached. Wait 5 seconds and the change will be accepted.
Changing between 12 or 24 hour time of day display
Clock
1. Press and hold the I_'_t button for6 seconds. The display will show either"12" (for 12 hour clock)or"24" (for24 hour
clock).
2. Press the or button to switch between the 12 and 24 hour time of day display.
3. Wait 5 seconds to accept the change.
14
Loading ...
Loading ...
Loading ...