Loading ...
Loading ...
3
GB
GB
Not placing the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
Educating children about the dangers of climbing on furniture
to reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.
Installation/Set-up
Install and use the TV set in accordance with the instructions
below in order to avoid any risk of fire, electric shock or damage
and/or injuries.
Apparatus connected to the protective earthing of the building
installation through the mains connection or through other
apparatus with a connection to protective earthing – and to a
television distribution system using coaxial cable, may in some
circumstances create a fire hazard. Connection to a television
distribution system therefore has to be provided through a device
providing electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Installation
The TV set should be installed near an easily accessible AC
power outlet (mains socket).
Place the TV set on a stable, level surface to prevent it from
falling over and causing personal injury or property damage.
Install the TV where it cannot be pulled, pushed, or knocked
over.
Install the TV so that the TV bottom does not protrude out from
the TV stand (not supplied). If the TV bottom protrudes out from
the TV stand, it may cause TV set to topple over, fall down, and
cause personal injury or damage to the TV.
Only qualified service personnel should carry out wall-mount
installations.
For safety reasons, it is strongly recommended that you use
Sony accessories, including:
Wall-Mount Bracket SU-WL450
Be sure to use the screws supplied with the TV when attaching
the Wall-Mount Bracket to the TV set. The supplied screws are
designed as indicated by illustration when measured from the
attaching surface of the Wall-Mount Bracket.
The diameter and length of the screws differ depending on the
Wall-Mount Bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
Transporting
Before transporting the TV set, disconnect all cables.
Two or three people are needed to transport a large TV set.
When transporting the TV set by hand, hold it as shown below.
Do not put stress on the panel and the frame around the screen.
When handling or mounting the
TV set, do not lay down the TV.
When transporting the TV set, do
not subject it to jolts or excessive vibration.
When transporting the TV set for repairs or when moving, pack
it using the original carton and packing material.
Topple prevention
Ventilation
Never cover the ventilation holes or insert anything in the
cabinet.
Leave space around the TV set as shown below.
It is strongly recommended that you use a Sony Wall-Mount
Bracket in order to provide adequate air circulation.
Installed on the wall
Screw (M6)
Wall-Mount Bracket
10 mm - 14 mm
TV’s rear cover
M4 screw (not supplied)
Cord
(not supplied)
Screw (not supplied)
6 mm - 7 mm
30 cm
10 cm
10 cm
10 cm
Leave at least this space around the set.
Loading ...
Loading ...
Loading ...