Loading ...
Loading ...
Loading ...
Section 3: Assembly
2. Insert carriage boks through holes from outside of unit
and attach a phstic knob from insNe of unit (Figure 2).
Tighten by hand.
%
3. Phce accessory tray over holes on hande (viewing
from front of uniO. Pushthe tree clips into the holes
until they sit fiat against the accessory tray (Figure 3).
/
4. Insert"L" hook through hole just above billboard on
left side of handle (viewing from front of unit). Hold
hook in place and attach a plastic knob from inside of
unit (Figure 4).Tighten by hand.
Spray Gun Hook
5. Insert multi-colored ProjectPro TMnozzles and other
supplied accessories in spaces provided in accessory
tray, See "How to Use AccessoryTray'.
Add Engine Oil and Fuel
° Place pressure washer on a [eve[ surface,
Refer to engine manual for oil and fuel fill information.
- Damage to equipment resuking from failure to follow this
instruction will void warranty.
" Refer to engine owner's manual and follow oil and fuel
recommendations and instructions,
NOTE: Check oil often during engine break-in, Refer to
engine owner's manual for recommendations,
O
Loading ...
Loading ...
Loading ...