Loading ...
Loading ...
Loading ...
6.2 ADJUST THE SPRAY NOZZLE
1
WARNING
Before you adjust the spray nozzle:
• Pull the spray gun trigger to release water pressure.
• Stop the machine.
WARNING
Do not point the spray wand at your face or others’.
1. Rotate the spray nozzle to adjust the spray setting (1).
6.3 5-IN-1 NOZZLE
Mode APPLICATION
0
O
Stream mode (0° )
• The 0 degree mode provides a
straight line of spray. It provides the
highest amount of pressure. It is best
used for removing hard, stuck-on
grime or dirt.
15
O
Narrow fan mode (15° )
• This mode provides high versatility
with 15 degree angle. It provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
age many surfaces. This mode is de-
signed for “sweeping” foliage or deb-
ris given its wide angle. This mode is
versatile due to its wide area of
cleaning and strong pressure applica-
tion.
25
O
Narrow fan mode (25° )
• This mode provides high versatility
with 25 degree angle. It provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
age many surfaces. This mode is de-
signed for “sweeping” foliage or deb-
ris given its wide angle. This mode is
versatile due to its wide area of
cleaning and strong pressure applica-
tion.
Mode APPLICATION
40
O
Wide fan mode (40° )
• The white 40 degree tip, referred to
as the “fan” tip creates the widest
area of cleaning with relatively low
pressure. This mode is best used for
light or delicate cleaning applica-
tions. It is recommended for light
cleaning on wood decks and other
soft or delicate surfaces.
SHOWER
Watering mode
• The mode is used for watering appli-
cation. Watering is applied under low
pressure high volume for optimum
performance. Watering cannot be ap-
plied under high pressure with this
machine.
6.4 INSTALL THE SOAP APPLICATOR
WARNING
Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
WARNING
Do the instructions on the solution bottle to prepare
detergent.
NOTE
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
1. Pour the detergent into the soap applicator.
2. Install the soap applicator onto the gun wand.
3. Turn clockwise the gun to tighten.
NOTE
Do not let detergent dry on the surface to prevent streaks.
6
English
EN
Loading ...
Loading ...
Loading ...