Loading ...
Loading ...
Loading ...
WARNING
When you operate the self-coiling hose, make sure that the
hose has no blockage.
WARNING
• The water supply must come from the water main
• Do not use hot water
• Do not use water from ponds or lakes
WARNING
Follow the local regulations when you connect the garden
hose to the water supply. Direct connection through a
receiver tank or backflow preventer is usually permitted.
CAUTION
Inspect the filter in the water inlet connector before you
connect the garden hose
• If the filter is damaged, do not use the machine until the
filter is replaced.
• If the filter is dirty, clean the filter.
NOTE
The garden hose adaptor is used to connect the garden hose
(not provided) to your machine.
1. Push the garden hose adaptor (7) onto the water inlet
coupler until it is tight.
7
2. Uncoil the garden hose.
3. Install and tighten the end of the garden hose to the water
inlet connector.
4. Turn the water supply off.
8
7
6 OPERATION
WARNING
Make sure that all the connections are tight and have no
leakage before operation.
6.1 USE THE POWER CLEANER
NOTE
For safe control, keep your hands on the power cleaner at
all times.
6
15
1. Push the lock-out button (15) into the slot, pull and hold
the trigger (6) to start the machine.
2. Release the trigger (6) to stop water flow through the
spray nozzle.
3. Push out the lock-out button to lock the trigger.
5
English
EN
Loading ...
Loading ...
Loading ...