Loading ...
Loading ...
Loading ...
Door Handle Hounting Instructions
1. Remove handle from carton and any other protective packaging.
2. Position handle end caps over upper and lower pro-installed shoulder bolts (A) that are
fastened into door, ensuring the holes for the set screws are facing towards the outside
of door if a single unit installation or the refrigerator door (if installing the matching
refrigerator).
3. While holding handle firmly against door, fasten upper and lower Allen set screws (B) with
supplied Allen wrench.
4. Repeat steps 2 and 3 to install handle (if installing the matching refrigerator). Ensure the
holes for the set screws are facing towards the refrigerator door.
Frigidaire Gallery ® Frigidaire Professional ®
Single Unit Installation
Ensure Handle Set Screws are Facing
Each Other with Doers Closed,
Hatching Refrigerator and Freezer Door
Handle Installation
All set screws should be tightened and sub-flush (Allen set screw should be seated just below
the surface of the end cap) of handle end cap. The end caps should be drawn tight to door
with no gaps.
Loading ...
Loading ...
Loading ...