Loading ...
Loading ...
Loading ...
1313
TABLE FOR THE CHOICE OF THE INJECTORS
Natural Gas ULPG
Test Point Pressure [kPa] 1.0 2.75
BURNER
Injector
Orifice
Dia.
[mm]
Gas
Consumption
[MJ/h]
Injector
Orifice
Dia.
[mm]
Gas
Consumption
[MJ/h]
Auxiliary (AUX) 0.92 3.90 0.56 3.90
Semi-rapid (SR) 1.17 6.50 0.70 6.20
Triple-ring (TR) 1.68 13.70 1.04 14.10
(Note: Gas type sticker and data plate are attached to the underside of the base of the
appliance.)
CONVERSION PROCEDURE (to convert to Natural gas or to ULPG)
REPLACING THE INJECTORS
The conversion procedure must be carried out only by an authorised person.
This appliance is suitable for use with Natural gas or Universal LPG (check the “gas type”
sticker attached to the appliance).
The nominal gas consumption and injector size details are provided in table above.
To replace the injectors proceed as follows:
■ Remove pan supports and burners from the cooktop.
■ Using a wrench, substitute the injectors “J” (gs. 5a, 5b) with those most suitable for
the kind of gas for which it is to be used (see table above).
■ Ax to the appliance the warning label stating that the cooktop has been converted
Triple-ring
burner
Figure 5b
J
Auxiliary and
semi-rapid
burners
Figure 5a
J
Loading ...
Loading ...
Loading ...