Loading ...
Loading ...
Loading ...
UNDERSTANDING SOUNDS YOU MAY
HEAR
Your new refrigerator may make sounds that your old
one did not make. Because the sounds are new to you,
you might be concerned about them. Most of the new
sounds are normal. Hard surfaces, like the floor, walls
and cabinets, can make the sounds seem louder than
they actually are. The following list describes the kinds of
sounds and what may be making them.
REFRIGERATOR DOES NOT OPERATE
Check if...
, The defrost timer will click when the automatic defrost
cycle begins and ends. The thermostat control (or
refrigerator control, depending on the model) will also
click when cycling on and off.
, Rattling noises may come from the flow of refrigerant,
the water line, or items stored on top of the
refrigerator.
, Your refrigerator is designed to run more efficiently
to keep your food items at the desired temperature.
The high efficiency compressor may cause your new
refrigerator to run longer than your old one, and you
may hear a pulsating or high-pitched sound.
You may hear the evaporator fan motor circulating the
air through the refrigerator and freezer compartments.
each cycle ends, you may hear a gurgling sound
due to the refrigerant flowing in your refrigerator.
Contraction and expansion of the inside walls may
cause a popping noise.
Water dripping on the defrost heater during a defrost
cycle may cause a sizzling sound.
You may hear air being forced over the condenser by
the condenser fan.
, You may hear water running into the drain pan during
the defrost cycle.
Then...
Firmly plug the cord into a live outlet with proper voltage.
Replace the fuse or reset the circuit breaker.
The power supply cord is unplugged.
A household fuse has blown or circuit
breaker tripped.
Refrigerator is in the defrost cycle.
Display shows the word OFF (Identify your control
type).
Wait about 30 minutes for defrost cycle to end.
The refrigerator control has been put into the store Demo
(Demonstration) Mode
The Demonstration Mode disables the cooling system,
only lamps and display work normally.
To disable Demo Mode open one door, then press Ultra Ice
and Fridge Temp buttons at the same time for 5 seconds.
When Demo Mode is deactivated, you will see the
previous value setting you had on display.
VIBRATION OR RATTLING NOISE
Check if...
J he refrigerator is not resting solidly onthe floor.
Then...
Floor is weak or uneven or leveling legs need adjusting.
See DOOR ALIGNMENT Section.
LIGHTS DO NOT WORK
Check if...
The power supply cord is unplugged.
Light bulb is loose in the socket.
Then...
Firmly plug the cord into a live outlet with proper voltage.
Turn the refrigerator control to the OFF position and unplug
the refrigerator. Gently remove the bulb and reinsert. Then
plug in refrigerator and reset the refrigerator control.
29
Loading ...
Loading ...
Loading ...