Loading ...
Loading ...
Loading ...
Setting the
Clock
FEATURE OVERVIEW
° Clock
° Energy Saving Mode
NOTE: The oven will not
work until the clock has
been set.
CLOCK
The clock may be set for 12 or 24 hour Time of Day operation. Your clock has been preset at the factory for 12 hour
operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the display will
flash. Pressing any key will stop the display from flashing.
INSTRUCTIONS DISPLAY
To set the Clock: (example 1:30)
1. Push C'_°_. TIME will flash in the display.
2. Push (_) (_ (_ to set the time of day to 1:30. TIME will disappear after 4 seconds
and the clock will start. Or, you may push _ and TIME will disappear and the clock will
staft.
TO change from 12 to 24 hour Time of Day operation
1. Push and hold _ for 6 seconds, a beep will sound.
2. The display will show 12 or 24 to indicate the option selected.
3. When _ is released the time of da_ will display. Reset the current time following the
steps above.
ENERGY SAVING MODE:
The control is programmed to limit all cooking operations to 12 or 24 hours (the Time of Day operation). This prevents the oven
from being accidentally set to operate for excessive time periods.
INSTRUCTIONS DISPLAY
To deactivate the Energy Saving Mode:
1. Push and hold _ for 6 seconds, a beep will sound.
2. The display will show OFF.
3. When _ is released the time of day will display.
To reactivate the Energy Saving Mode:
1. Push and hold Q for 6 seconds, a beep will sound.
2. The display will show ON.
3. When C_EAj_is released the time of day will display.
10
Loading ...
Loading ...
Loading ...