Loading ...
Loading ...
Loading ...
25
2. Select any procedure on control knob and press the
[Start/Pause] button and let run for about 40 seconds.
3. After 40 seconds, stop the cycle and remove the hot and
cold water hoses from the wall and back of the unit.
4. Run warm water through both hoses.
5. If your wall connection has a built-in filter, pull out filter
with long nose pliers and wash under warm water.
6. Unscrew the inlet pipe from the backside of the machine.
7. Pull out the filter with long nose pliers and wash under
warm water.
8. Reconnect the inlet pipe.
9. Turn on the tap and make sure there is no water leakage.
NOTE: Generally, the tap filter should be washed first and
then the filter to the washing machine.
REMOVING FOREIGN MATTERS FROM
COIN TRAP
The Coin Trap can collect small objects from the wash
cycle. Clean out the coin trap regularly to ensure
normal operation of washing machine. (Coin Trap is
located on front panel of unit, bottom right corner.)
1. Place drain pan under to catch excess water.
2. Open the coin trap door.
3. Turn the knob counterclockwise.
4. Pull out the coin trap and remove articles.
5. Return the coin trap and turn clockwise to
close it.
6. Close the coin trap door.
Figure 20
Figure 21
Figure 22
1
3
2
4
Loading ...
Loading ...
Loading ...