Loading ...
Loading ...
Loading ...
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the fan before cleaning.
Use only a soft, damp cloth to gently wipe
the fan and dry well.
Do not immerse the fan in water and never
allow water to enter the motor housing.
Do not use harsh chemicals to clean the
fan.
Place the fan on a dry, level and sturdy
surface.
Plug the power cord into the socket,
making sure the speed control is at off
position.
To operate the fan turn speed control dial
clockwise until desired wind speed is
achieved.
Fan control switch
The control switch positions are:
• 0 = Off
• I = Low speed
• II = Medium Speed
• III = High Speed
To activate the oscillation function, push
down the oscillation pin on the top of the
motor. The fan will then oscillate until the
pin is pulled back up.
Adjust tilt by turning neck screw and tilting
body to the desired wind direction
(i.e. either upward or downward).
WARNING Keep all objects at least 1
metre from the front, sides and rear of
the appliance
IMPORTANT! NEVER COVER THIS
APPLIANCE!
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable
appliance.
Operating your Fan
Cleaning
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Loading ...