Loading ...
Loading ...
Loading ...
Body Assembly
Step 1 - Unscrew the ring and
base locking screw from the pole.
Step 2 - Insert the pole through
The hole in the center of the
stand base, and twist into position.
Step 3 - Turn the base upside down with
the pole facing the floor and place the
base weight support to the bottom of the
stand base. Tighten the base weight
support to the stand base with the base
locking screw.
Step 4 - Unscrew the tilt-lock nut from the
motor unit.
Step 5 - Put the motor unit into the pole.
Reinsert and tighten the tilt-lock nut.
Fan Grill Assembly
Step 1 - Align the rear grill on the motor
unit, then screw in the 4x rear grill screws
to secure it in place.
Step 2 - Install the blade onto the motor
shaft by tightening the blade screw.
Step 3 - Centre the front grill by aligning
the central logo so it is horizontal and
parallel to the floor. Then, secure the front
and rear grills completely together by
snapping 5x grill clips into place.
Step 4 - Tighten the grill locking screw at
the bottom of the rear grill.
Assembly
Loading ...
Loading ...