Loading ...
Loading ...
Loading ...
6
Operation
When Using the Appliance:
In order to ensure proper temperature, allow proper airflow in and around the
appliance. When stocking the freezer, do not block off any air vents. If the
vents are blocked, airflow will be hindered, and temperature and moisture
problems may occur. See page 5 for proper clearances around the unit.
Let the freezer cool for at least 6 to 8 hours before adding contents. Allow 24
hours for the temperature to stabilize.
NOTE: When the appliance is first started, the compressor will run constantly
until the appliance is cooled. It may take 6 to 8 hours (or longer),
depending on room temperature and the number of times the appliance
drawers are opened. After the freezer has cooled, the compressor will
turn on and off as needed to keep the appliance at the proper
temperature.
For optimum temperature performance, it is recommended that this
unit be at least 30% full during use. If you are only using this unit to
store small loads, we recommend adding some freezer packs to ensure
temperature stability.
The outside of the freezer may feel warm. This is normal. The appliance’s
design and main function is to remove heat from packages and air space
inside the appliance. The heat is transferred to the room air, making the
outside of the appliance feel warm. (In some models the condenser that gets
warm is just inside the side walls, making these walls warm to the touch.)
ENERGY-SAVING TIPS
The more airflow provided around an appliance, the less energy it will use.
Keep ice build-up inside the freezer to less than 1/2". At this point you
should manually defrost the unit. See page 7.
Keep drawers open a minimum of time, and shut securely.
Removal/Replacement of the Drawers:
To remove a drawer from the freezer:
Pull the drawer out towards you completely.
On both sides of the drawer there are hinges.
On each hinge there is a black lever.
The left lever should be pulled up.
The right lever should be pulled down.
Both levers should be pulled at the same time while continuing to pull
out the drawer.
To reinstall the drawers:
Line up the hinges on the drawer with the hinges on the appliance
and gently push the drawer in.
Once it is lined up, close the drawer completely then open again to
make sure the drawer is on track.
Loading ...
Loading ...
Loading ...