Loading ...
Loading ...
Loading ...
14
USING YOUR APPLIANCE
To replace the drawer,
1. Make sure the telescopic slides are pushed in all
the way.
2. Slide the drawer into place over the slides and push
the bin in until it stops. The bin will not be closed all the
way.
3. Open the bin to access the finger tabs at the ends of
the telescopic slides, on each side of the bin. Using
your thumb and forefinger, lift the bin over the end of
the slide and clip in place. If the drawer is not fully
engaged on the slide, it’s possible the drawer won’t
stay on the slide if fully extended.
The end of slide must
be clipped into place
4. Fully close the bin.
When replacing the drawers after cleaning, we recommend
fitting the lower drawer first.
SPILLSAFE™ GLASS SHELVES (WHERE FITTED)
Spillsafe™ glass shelves
keep spills on the shelf. A
shelf retaining system
minimises accidental
movement of shelves and
they can be adjusted to
various heights. Spillsafe™
glass shelves are not to be
used as slide out shelves. To remove the shelves, gently pull
them forward until the shelf comes clear of the shelf guides.
To return the shelf, make sure there is nothing behind that
may obstruct movement. Gently push the shelf into the
cabinet and back into position.
BOTTLE HOLDER
The bottle holder can be
used to store various
types of bottles like wine
or beer. Bottles should be
stored with the bottom
end towards the back of the refrigerator. Selected models
are supplied with a chrome, full-width wine rack.
FREEZER DRAWERS
Freezer drawers are fitted to
bottom mount models and
single door all freezer models.
The drawers are mounted on
telescopic extension slides, to
enable full access to the content
in the drawer. Clear plastic
fronts provide easy visibility of
foods.
To remove the drawer for cleaning,
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you have
removed the drawer, ensure the slides are pushed back
so they are fully closed.
WARNING
WARNING
Never close the door while the telescopic slides are
extended. This may damage the slide and/or refrigerator
or cause the slide to become disengaged from the
refrigerator.
Loading ...
Loading ...
Loading ...