Loading ...
Loading ...
Loading ...
Connect the water line to the refrigerator.
1) Slip the compression nut through the provided
plastic tubing.
2) Tighten the compression nut onto the 1/4"
compression fitting.
(_ Do notOvertightenthecompression nut.
NOTE
• Using Copper Tubing
- Slip the compression nut and ferrule on
copper tubing as shown.
• Using Plastic Tubing
- Insert the molded end of the plastic tubing
intothe compression fitting.
3) Tighten the compression nut onto the com-
pression fitting.
4) Turn water on and check for any leakage.
NOTE
I Refrigerator
Ferrule , .
_Compresslon Nut(1/4")
U ", (Provided)
--_Compression Fitting
. (Provided)
)ressi0nNut(1/4")
(Purchased)
PlasticTubing
CopperTubing (Purchased)
(Purchased)
IHousehold Water Line I
Waterline must be connected to drinkabie water o_ly.
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnecting.
Install the water filter.
1) Remove the fixed cap (A) as shown, the fixed cap separates from
the Water Filter Compartment by rotating itcounterclockwise.
Remove the water filter from the box and put a month indicator
stick on the filter as shown.
(_ Keep the cap(A) in a safe place for recapping, when you
NOTE don't need to use the filter.
2) If the water filter was installed in March, put on the "SEP" sticker.
3) Remove the Red protective cap from the filter, then position and
insertthe filter as shown.
4) Slowly turn the water filter clockwise 90° to align
the indicationmark on the cover, locking the filter in
position. Do not overtighten. ®
SEPARATION ._-:___
OF RED CAP -
STICKER __
(MONTH INDICATION)
G
3
\ \
COVER FILTER
ALIGN THE INDICATION MARK
WITH LOCK POSITION.
Please check that the indication line aligns with the lock position.
NOTE
27
Loading ...
Loading ...
Loading ...