Loading ...
Loading ...
Loading ...
ROUTE THE VENT
Typical installationsexhaust from the rear
of the dryer.
Avoid pushing the dryer tightly against
a wail. This can crush or kink the vent.
Use the straightest path ,ou can, where
possible. Avoid 90° turns.
Rear exhaust instaIlations for standard
offset connections - (see pgs 20-21)
Rear exhaust instalIations for offset
coRRections with close clearances -
(see p. 22)
This dryer may be conver[ed to exhaust
out the right or left side or through the
bottom. To convert the dryer, one of the
following kits must be used.
Exhaust Kit No. 279818 (white)
Exhaust Kit No. 279819 (almond)
Exhaust Kit No. 279915 (graphite)
Exhaust Kit No. 279925 (bisque)
Fire Hazard
Cover unused exhaust holes with
one of the following kits:
279818 (white)
279819 (almond)
279915 (graphite)
279925 (bisque)
Contact your local dealer.
Failure to follow these instructions
can result in death, fire,
electrical shock or serious injury.
Follow the instructions in the kit to
avoid operational and personal hazards.
These kits are available at your local
Sears store or Sears Service Center.
Typical instaIIations for left or right side
exhausting
'_1'i
Typical installations for bottom exhausting 19
Loading ...
Loading ...
Loading ...