Loading ...
Loading ...
Loading ...
11 – ENGLISH
annually and replace only with a major brand, 1.5V “AA” alkaline battery. If the clock stops oper-
ating, replace the battery. Discard spent batteries according to your state/country’s regulations.
Remove the battery if the Model Three BT is to be stored or unused for a long period of time.
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not con-
nected to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1. Turn on the Model Three BT to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will change
from “Not Paired” to “Connected”.
4. You will hear a ring tone from the Model Three BT confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should not have to
pair your device again. Depending on your device, you may need to make multiple attempts
at Pairing and/or Connecting to the Model Three BT, but please give your device adequate
time to Pair or Connect before repeating the process.
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod Touch/iPad
1. Turn on the Model Three BT to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Select “Settings” (depending on software version).
3. Select “General”.
4. Select “Bluetooth”.
5. Switch Bluetooth “On” to initiate searching.
6.
Select “Tivoli Bluetooth (Not Paired)” when it appears on the display. If you are prompted to enter
a PIN, enter “0000”. “Tivoli Bluetooth” will change from “Not Paired” to “Connected”.
7. You will hear a ring tone from the Model Three BT and you can begin playing your music files
wirelessly. Adjust the volume level on your device. You should not have to pair your iPhone/
iPod/iPad again.
The volume output level of music files varies. If you prefer an even higher output level, check the set-
tings in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the Volume limit Off.
If you encounter a problem Pairing, press the small arrow to the right of “Tivoli Bluetooth” on your
iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing process.
Depending on your device, you may need to make multiple attempts at Pairing and/or Con-
necting to the Model Three BT, but please give your device adequate time to Pair or Connect
before repeating the process.
Loading ...
Loading ...
Loading ...