Loading ...
Loading ...
Loading ...
- 30 -
4 5
Note: If you find the black sealing ring is missing, you can replace it with the accessorial spare sealing ring (8).
1. Put the sealing ring into the cylinder holder.
2. Press the sealing ring into position with your finger or other useful tools.
DAILY USE
Make sure the Soda Maker machine, the PET bottle and the CO
2
gas cylinder are well installed before start.
Please note the CO
2
gas cylinder is not provided with the machine. Please purchase it from your local stores.
CO
2
gas cylinder should be 0.6L.
1. Always fill the PET bottle with water up to the marked level and screw it into the appliance.
2. Press the carbonate button for 2-3 seconds to carbonate. If you wish, you can press it again to get extra
carbonic.
3. Press the gas release button to release the gas pressure. A hissing sound will be heard. Keep pressing until
no more hissing sound can be heard; it means the gas pressure has been released completely.
NOTE: The gas pressure must be released completely, otherwise the PET bottle cannot be loosened!
4. Unscrew the bottle clockwise from the appliance. Now the carbonated water is ready to drink and you can
flavor the carbonated water as desired.
NOTE: Do not add flavor into water before carbonating!
Very small amount of water may leak out when overfilled or if you press the carbonate button too long. Do
not worry, it is normal. Clean up the water in the tray when necessary.
1 2 3 4
FREQUENTLY ASKED QUESTIONS
Can I use another brand of CO
2
gas cylinder?
Yes. The Soda Maker machine is compatible with most of the popular cylinders in the market. Please check
with the CO
2
gas cylinder suppliers before use.
Loading ...
Loading ...
Loading ...