Loading ...
Loading ...
Loading ...
Self-Cleanincj (Upper oven only)
What to Expect during Cleaning:
While the oven is in operation, the oven heats to temperatures much higher than those used in normal cooking.
Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed.
Smoke may appear through the oven vent.
If heavy spillovers are not wiped up before cleaning, they may flame and cause more smoke and odor than usual.
This is normal and safe and should not cause alarm. If available, use an exhaust fan during the self-cleaning
cycle.
Self-Clean Cycle ffme length
For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3
hour cycle for average or a 4 hour cycle for heavy soils. NOTE: The kitchen
area should be well ventilated using an open window, ventilation fan or
exhaust hood during the Self-Clean cycle. This will help eliminate the normal
odors associated with the Self-Clean cycle.
To Set the Controls for a Self=Clean Cycle or a Delayed Start Self=Clean Cycle:
(Note: if you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.)
1. Be sure the clock shows the correct time of day.
2. Press (x_. "DELAY" will flash.
3. Press and hold theApad to scroll to the time to start the delayed Self-
Clean cycle. Release the pad when the desired time is displayed.
4. Press _. " " appears in the display.
5. Press theAor Vance. "3:00" appears in the display for a 3 hour cycle.
To change to a 2 hour cycle pressV. "2:00" appears in the display or to
select a 4 hour cycle press A. "4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close
automatically and the "LOCKED" indicator light will appear. DO NOT
open the oven door while the light is flashing (it takes about 15 seconds
for the oven door to lock).
6. "CLn" will appear in the display during the Self-Clean cycle and the
"DOOR LOCKED" light will glow until the Self-Cleaning cycle is complete
or cancelled and the oven temperature has cooled.
_ " "' To avoid possible
burns use care when opening
the oven door after the Self-
Cleaning cycle. Stand to the
side of the oven when opening
the door to allow hot air or
steam to escape.
DO NOT force
the oven door open. This can
damage the automatic door
locking system. Use caution and
avoid possible burns when
opening the door after the
Self-Cleaning cycle has
completed. The oven may still
be VERY HOT.
When the Self=Clean Cycle is Completed:
1. The time of day or "End" will appear in the display window and the
"Clean" and "DOOR LOCKED" light will continue to glow.
2. Once the oven has cooled down for about 1 HOUR and the "DOOR
LOCKED" light has gone out, the oven door can be opened.
NOTE: When the oven is cool, wipe away any residue or powdered ash with
a damp cloth or paper towel.
Stopping or interrupting a Self=Cleanlng Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1. Press (_.
2. Once the oven has cooled down for about 1 HOUR and the "DOOR
LOCI<" light has gone out, the oven door can be opened.
3. Restart the Self-Clean cycle once all conditions have been corrected.
16
Loading ...
Loading ...
Loading ...