Loading ...
Loading ...
Loading ...
55
OPERATION / USER
To preserve the quality of the nano coating please observe these guidelines.
• Allow the burners to cool down to room temperature before cleaning. Do not dip them
in cold water to speed up the cooling down process.
• Wash with warm, soapy water. Rub with a soft cloth or non-abrasive sponge. Do not
use abrasive powder, steel wool or abrasive sponges.
• Avoid leaving food or splatter on the burner. This will result in charred deposits that will
be more difcult to remove and may cause stains or discolourations to appear on the
surface. These blemishes do not alter the functionality of the product. In some cases
they can be eliminated by immersing the burners in hot, soapy water and then wiping
them gently with a soft cloth or non-abrasive sponge. For stubborn stains, use warm
white vinegar and wiping them as above.
• Avoid leaving the burners in contact with food for a long time, especially if acidic, such
as tomato sauce, lemon juice.
• Avoid contact with metal objects; if you must touch them, use wooden or plastic
utensils.
• Avoid washing in the dishwasher, the underside of the burner is not coated and would
get irreparably damaged.
• In case of malfunction, make sure that the holes in the outer crown are perfectly dry
and clean.
Annual service by an authorised person is recommended, or if any of the following
conditions are noticed. Incomplete ignition, appreciable yellow tipping, carbon
deposition, lifting, oating, lighting back or objectionable odour.
Contact 1300 856 411 or [email protected]
ATTENTION:
CLEANING AND MAINTENANCE
– Maintenance and cleaning of total black burners with
nano-technological coating
Problem Cause Solution
The ame is uneven /
unstable
Wrong gas type Have an expert check the gas supply
The ame from the burners
suddenly changes
Wrongly assembled burner
parts
Ensure burner parts are in the correct
position
Burner extinguishes after
lighting
Insufcient time for the
sensor to detect that the
burner is on
Push the burner knob a little longer (no
more than 10 seconds)
Spark is uneven Food residues between
the electrode and the
burner
Make sure both the burner components
and the ignition electrode are clean
Loading ...
Loading ...
Loading ...