Loading ...
Loading ...
Loading ...
79
SETUP menu
Item Description
OSD MESSAGE
Using the ▲/▼ buttons turns on/off the message function.
NORMAL
ó
SILENT
ó
INHIBIT
■SILENT
: The following message functions does not work.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ.”
“NOT AVAILABLE”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the ZOOM displayed by changing
*While operating from the remote control only.
The indication of the FOCUS displayed by changing
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the ACTIVE IRIS displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of “FREEZE” and “II” while freezing the screen by
pressing the FREEZE button.
The indication of the TEMPLATE displayed by changing.
The indication of the ECO MODE displayed by changing.
■INHIBIT
: All message functions does not work.
The only buttons will function are as below.
STANDBY, ON
Status Monitor can be operated.
• To change this function, follow the steps below.
1. Press the OSD MSG button on the remote control for 3 sec.
2. The HIDE OSD will be displayed.
While this OSD is displayed, press the OSD MSG button again
on the remote control.
3. Toggle and change the function.
NORMAL
ó
SILENT
ó
INHIBIT
Loading ...
Loading ...
Loading ...