Loading ...
Loading ...
Loading ...
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
"F-" AND A NUMBER
FLASH 1N THE DISPLAY
OVEN WILL NOT WORK
OVEN LIGHT
DOES NOT WORK
FOOD DOES NOT
BROIL PROPERLY
FOOD DOES NOT ROAST
OR BAKE PROPERLY
OVEN WILL NOT
SELF-CLEAN
DOOR WILL NOT OPEN
AFTER SELF-CLEAN CYCLE
CONTROL SIGNALS AFTER
ENTERING COOKTIME
OR STOP TIME
OVEN TEMPERATURE
TOO HOT OR TOO COLD
"BURNING" OR "OILY"
ODOR EMITTING FROM
OVEN WHEN TURNED ON
STRONG OROR
OVEN NOT CLEAN
AFTER CLEAN CYCLE
POSSIBLE CAUSE
This is function error code. Press the CLEAR/OFF pad, Allow the oven to cool
one hour. Place the oven back into operation, If function error occurs again,
disconnect power to the oven and calt for service.
The circuit breaker in your house has been tripped, or a fuse has been blown,
The oven controls are not properly set.
The light bulb is loose or defective. Tighten or replace.
The switch operating the oven light is broken. Call for service.
Oven controls not set properly. See the Broiling section.
Dour not left open to the broil stop position as recommended.
Improper shelf position being used. See the Broiling Guide.
Food is being cooked on a hot pan.
Cookware is not suitable for broiling.
Low voltage. See the Broiling section.
Aluminum foil used on the broiler pan and rack has not been fitted properly
and slit as recommended.
Oven controls not set properly. See the Baking or Roasting section.
Shelf position is incorrect. See the Roasting or Baking section,
Incorrect cookware or cookware of improper size is being used.
,Oven thermostat needs adjustment. See the Adjust the Oven Thermostat--
Do It Yourself section.
*Oven temperature is too high to set self-clean operation.
Allow the oven to cool to room temperature and reset the controls.
,When the temperature has fallen below the locking temperature
door can be opened.
,This is reminding you to enter a bake temperature.
Oven thermostat needs adjustment. See the Adjust the Oven Thermostat--
Do It Yourself section.
This is normal in a new oven and will disappear in time. To speed the process,
set a self-clean cycle for a minimum of 3 hours. See the Operating the Self-
Cleaning Oven section.
An odor from' the insulation around the inside of the oven is normal for the
first few times the oven is used. This is temporary.
Oven controls not set properly. See the Operating the Self-Cleaning Oven section.
* Heavily soiled ovens require 31/2-to 4-hour Clean Time.
Heavy spillovers should be cleaned up before starting clean cycle.
(continued next page)
25
Loading ...
Loading ...
Loading ...