Troy-Bilt 24B-060F063 Troybilt yard vacuum chipper/shredder

User Manual - Page 9

For 24B-060F063.

PDF File Manual, 20 pages, Read Online | Download pdf file

24B-060F063 photo
Loading ...
Loading ...
Loading ...
Twistthetwobuttonsonthebackofthebagto
unlockandemptycontents.SeeFigure7.
Holdbaghandleandbagclipwhileemptyingthe
contents.
Compressbagopeningandfoldinnerflapover
opening.
Foldouterflapoverinnerflapandinsertbuttonson
thebagthroughmetaloutlets.
Twistthebuttonstolockbag.
Bag
Inner Flap
Handle
Figure 7
ToRemoveBlowerChute(ifEquipped)
Grasp blower chute with one hand and pull lock rod
on mounting bracket with other hand toward engine
to release. Refer to Figure 5.
Remove blower chute from rim of the discharge
opening.
UsingtheNozzleVacuum
Place nozzle!hose vac handle in the top position on
the nozzle to vacuum through nozzle. See Figure 8.
The spring loaded pin must be in the first hole of the
hose adapter to operate the nozzle vac.
Place both hands on top of upper handle to push
unit over yard waste.
Yard waste such as leaves and pine needles can be
vacuumed up through the nozzle for shredding. After
material has been shredded by the flail blades on the
impeller assembly, itwill be discharged into catcher bag
or through blower chute (if equipped). Do not attempt to
shred or chip any material other than vegetation found
in a normal yard (i.e. branches, leaves, twigs, etc.)
Avoid fibrous plants such as tomato vines until they are
thoroughly dried out. Materials such as stalks or heavy
branches up to 1 1/2" in diameter may be fed into the
chipper chute.
Nozzle/Hose
Vac Handle
Spring
(First Hole)
Figure 8
IMPORTANT:The flail screen is located inside the
housing in the discharge area. Ifthe flail screen
becomes clogged, remove and clean as instructed in
SECTION 5: MAINTAINING YOUR YARD VACUUM.
For best performance, it is also important to keep the
chipper blade sharp.
,_ WARNING: Do not at any time make any
adjustments without first stopping engine
and disconnecting spark plug wire.
UsingtheHoseAssembly
Place nozzle/hose vac handle in the bottom
position on the nozzle to redirect vacuum to the
hose assembly. See Figure 9.
The spring loaded pin must be in the second hole of
the hose adapter to operate the hose assembly.
Unhook the hose from upper handle bracket and
grasp the hose handle to guide while vacuuming
yard waste such as leaves or pine needles in hard
to reach places.
Nozzle/Hose
Vac Handle
(Bottom
Spring Loaded Pin
(Second Hole)
Figure 9
Loading ...
Loading ...
Loading ...