Loading ...
Loading ...
Loading ...
NozzleHeightAdjustment
The nozzle can be adjusted to any six positions,
ranging from 5/8" to 4 1/8" ground clearance. The
nozzle height has to be adjusted according to the
conditions. Move the height adjustment levers forward
or backward to adjust the nozzle upwards or
downwards. Make sure both levers are in the same
position. See Figure 10.
NOTE: In general, raise the nozzle height to vacuum a
thick layer of leaves or to operate with the blower chute
(if equipped) and lower the nozzle height for smoother
surfaces.
Nozzle
Figure 10
Adjustment
Lever
SECTION5: MAINTAININGYOURYARDVACUUM
CustomerResponsibilities
MAINTENANCE _,_°_" ,'v e3 _ _,
SCHEDULE _o_-_ ,._<k _,_ ,._,_, 0<.o_' _o
t-- LubricateWheels
0 Lubricate Nozzle Levers ,_
a
O LubricateLockingRod
n
Lubricate Nozzle/Hose Handle
Check Chipper Blade _ ,_
Change Oil ,_
7w CheckAir Filter _:_
z Clean Engine ,_
Check Spark Plug _
SERVICE
DATES
WARNING: Always stop engine and
disconnect spark plug wire before
cleaning, lubricating or doing any kind of
maintenance on your machine.
Lubrication
Wheels: Lubricate each wheel shoulder screw once a
season with light oil. Refer to Figure 6.
Nozzle height adjustment levers: Lubricate the pivot
points of the nozzle height adjustment levers once a
season with light oil. Refer to Figure 6.
Locking Rod: Lubricate the locking rod with light oil to
ease the application of attaching on or removing bag or
blower chute (if equipped). Refer to Figure 6.
Nozzle/Hose Vac Handle: Lubricate the nozzle/hose
vac handle on top of nozzle once a season with light oil.
Refer to Figure 6.
Engine: Follow the separate engine manual packed
with you unit for lubrication instructions.
10
Loading ...
Loading ...
Loading ...