Smeg SOP6101S2S Pyro steam Galileo Oven 60cm

User Manual - Page 34

For SOP6101S2S.

PDF File Manual, 41 pages, Download pdf file

Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 79914779946/B
e
drain the reservoir.
7. Press the temperature knob to drain the
water from the reservoir into the deep pan.
8. Wait for the end of the exhaust flow (check
that both level indicator lights are
switched off).
9. Press the temperature knob to stop the drain
function.
10. Drain the water from the deep pan.
The display shows the new request to fill the
reservoir with water.
11.Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
12. Pour one litre of water into the funnel placed
in the loading drawer (using a bottle or a
graduated jug) until it has overflown to the
bottom of the cavity.
13.Press the temperature knob to start the
function and wait one minute.
At the end, the appliance sounds an acoustic
signal and the display shows the request to
drain the reservoir.
14. Drain the water from the reservoir into the
deep pan.
15.Wait for the end of the exhaust flow (check
that both level indicator lights are
switched off).
16. Press the temperature knob to stop the drain
function.
17.Drain the water from the deep pan.
18.Return the function knob to the 0 position.
Sanitization
Sanitization with steam allows to remove the last
residues of descaling from the hydraulic circuit.
1. Select the steam-assisted
+
function using the function knob.
2. Open the door
3. Pull the loading drawer out of its housing.
4. Insert the funnel provided in the loading
drawer.
5. Pour 500 ml water (using a bottle or a
measuring jug).
6. At the end, remove the funnel and place the
loading drawer back in its place.
7. Close the door.
8. Press the temperature knob to start the
function.
9. Press and turn the temperature knob to set
the duration of 30 minutes
10.Wait a few seconds.
11.Press and hold the temperature knob for a
few seconds to skip the preheating phase
(the indicator light stops flashing).
12.Wait for the function to be executed until the
end.
13.When the function has finished, turn the
function and temperature knobs to the 0
position.
14.Open the door
Take care: wait for the oven cavity to
cool down.
Loading ...
Loading ...
Loading ...